Alternative implementations of a fractional order control algorithm on FPGAs

Traditionally, microprocessor and digital signal processors have been used extensively in controlling simple processes, such as direct current motors. The Field Programmable Gate Arrays (FPGA) are currently emerging as an alternative to the previously used devices in controlling all sorts of processes. The fractional order proportional-integrative control algorithm has the advantage of enhancing the closed loop performance as compared to traditional proportional-integrative controllers, but the implementation requires a higher number of computations. Implementations of control algorithms on FPGAs are nowadays much faster than implementations on microprocessors. This allows for a more accurate digital realization of the fractional order controller. The paper presents nine alternative implementations of such control algorithm on two different FPGA targets. The experimental results, considering DC motor speed control, show that double, fixed-point and integer data representation may be used efficiently for control purposes

Theoretical analysis and experimental validation of a simplified fractional order controller for a magnetic levitation system

Fractional order (FO) controllers are among the emerging solutions for increasing closed-loop performance and robustness. However, they have been applied mostly to stable processes. When applied to unstable systems, the tuning technique uses the well-known frequency-domain procedures or complex genetic algorithms. This brief proposes a special type of an FO controller, as well as a novel tuning procedure, which is simple and does not involve any optimization routines. The controller parameters may be determined directly using overshoot requirements and the study of the stability of FO systems. The tuning procedure is given for the general case of a class of unstable systems with pole multiplicity. The advantage of the proposed FO controller consists in the simplicity of the tuning approach. The case study considered in this brief consists in a magnetic levitation system. The experimental results provided show that the designed controller can indeed stabilize the magnetic levitation system, as well as provide robustness to modeling uncertainties and supplementary loading conditions. For comparison purposes, a simple PID controller is also designed to point out the advantages of using the proposed FO controller

Development and Analysis of Low-Cost IoT Sensors for Urban Environmental Monitoring

The accelerated pace of urbanization is having a major impact over the world’s environment. Although urban dwellers have higher living standards and can access better public services as compared to their rural counterparts, they are usually exposed to poor environmental conditions such as air pollution and noise. In order for municipalities and citizens to mitigate the negative effects of pollution, the monitoring of certain parameters, such as air quality and ambient sound levels, both in indoor and outdoor locations, has to be performed. The current paper presents a complete solution that allows the monitoring of ambient parameters such as Volatile Organic Compounds, temperature, relative humidity, pressure, and sound intensity levels both in indoor and outdoor spaces. The presented solution comprises of low-cost, easy to deploy, wireless sensors and a cloud application for their management and for storing and visualizing the recorded data

Performance Evaluation of Energy-Autonomous Sensors Using Power-Harvesting Beacons for Environmental Monitoring in Internet of Things (IoT)

Environmental conditions and air quality monitoring have become crucial today due to the undeniable changes of the climate and accelerated urbanization. To efficiently monitor environmental parameters such as temperature, humidity, and the levels of pollutants, such as fine particulate matter (PM2.5) and volatile organic compounds (VOCs) in the air, and to collect data covering vast geographical areas, the development of cheap energy-autonomous sensors for large scale deployment and fine-grained data acquisition is required. Rapid advances in electronics and communication technologies along with the emergence of paradigms such as Cyber-Physical Systems (CPSs) and the Internet of Things (IoT) have led to the development of low-cost sensor devices that can operate unattended for long periods of time and communicate using wired or wireless connections through the Internet. We investigate the energy efficiency of an environmental monitoring system based on Bluetooth Low Energy (BLE) beacons that operate in the IoT environment. The beacons developed measure the temperature, the relative humidity, the light intensity, and the CO2 and VOC levels in the air. Based on our analysis we have developed efficient sleep scheduling algorithms that allow the sensor nodes developed to operate autonomously without requiring the replacement of the power supply. The experimental results show that low-power sensors communicating using BLE technology can operate autonomously (from the energy perspective) in applications that monitor the environment or the air quality in indoor or outdoor settings

Energy Harvesting Techniques for Internet of Things (IoT)

The rapid growth of the Internet of Things (IoT) has accelerated strong interests in the development of low-power wireless sensors. Today, wireless sensors are integrated within IoT systems to gather information in a reliable and practical manner to monitor processes and control activities in areas such as transportation, energy, civil infrastructure, smart buildings, environment monitoring, healthcare, defense, manufacturing, and production. The long-term and self-sustainable operation of these IoT devices must be considered early on when they are designed and implemented. Traditionally, wireless sensors have often been powered by batteries, which, despite allowing low overall system costs, can negatively impact the lifespan and the performance of the entire network they are used in. Energy Harvesting (EH) technology is a promising environment-friendly solution that extends the lifetime of these sensors, and, in some cases completely replaces the use of battery power. In addition, energy harvesting offers economic and practical advantages through the optimal use of energy, and the provisioning of lower network maintenance costs. We review recent advances in energy harvesting techniques for IoT. We demonstrate two energy harvesting techniques using case studies. Finally, we discuss some future research challenges that must be addressed to enable the large-scale deployment of energy harvesting solutions for IoT environments

Fractional order modeling and control of a smart beam

Smart beams are one of the most frequently used means of studying vibrations in airplane wings. Their mathematical models have been so far solely based on classical approaches that ultimately involve integer order transfer functions. In this paper, a different approach towards modeling such smart beams is considered, an approach that is based on fractional calculus. In this way, a fractional order model of the smart beam is obtained, which is able to better capture the dynamics of the system. Based on this novel fractional order model, a fractional order PD mu controller is then tuned according to a set of three design constraints. This design leads to a closed loop system that exhibits a much smaller resonant peak compared to the uncompensated smart beam system. Experimental results are provided, considering both passive and active control responses of the smart beam, showing that a significant improvement of the closed loop behavior is obtained using the designed controller